www.ford-econoline.com
http://www.ford-econoline.com/forum/

Doghouse
http://www.ford-econoline.com/forum/viewtopic.php?f=1&t=331
Page 1 of 1

Author:  Smitty [ Mon Jan 28, 2013 3:48 pm ]
Post subject:  Doghouse

What is the hump for on the aft portion of my 1966 doghouise? My parts pickup doghouse is flat on the bottom.

Author:  econoaddict [ Mon Jan 28, 2013 10:20 pm ]
Post subject:  Re: Doghouse

That is for clearance at the rear of the 240 engine, the bellhousing to block area.
I have had a handful of bone stock econo's that came with a small six and the big six doghouse.
Not 100% on this but I think i read somewhere that that doghouse is a bit taller as well.

Author:  Smitty [ Tue Jan 29, 2013 6:56 pm ]
Post subject:  Re: Doghouse

Thanks.

Smitty

Author:  Barnabas [ Sun Feb 17, 2013 4:44 pm ]
Post subject:  Re: Doghouse

The doghouse changed in 1965. It's taller than the earlier one and has the hump, as mentioned earlier. If you are going to put in a V8, the later doghouse makes it much easier.

Author:  67fairlane [ Tue Feb 19, 2013 8:22 pm ]
Post subject:  Re: Doghouse

My 62 5 window had a original 144 and had the dog house with the hump in the bottom the 250 is about an inch or inch and a half taller

Author:  67fairlane [ Tue Feb 19, 2013 8:23 pm ]
Post subject:  Re: Doghouse

Mine is also the heavy duty model with the 9 inch rear if that makes a difference

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/